About Me
My Blinkie
Sunday, October 20, 2019
I have a couple of new products for the month of October in stores now!
Check them out below!
For the month of October, I have a nice little sale going on - 30% off most everything!
You can check the sale & my products out here.
Thursday, October 17, 2019
This tutorial was written by me on October 16th, 2019 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP 2019
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the art of Alec Rud. You can purchase his tubes here.
PTU kit from Crazymoonas Dezinz called Ghouls Night Out.
You can purchase it here.
Mask 111 from Designs by Vaybs. You can find it here.
Template 887 from Millie’s PSP Madness. You can find it here.
Font of choice. I am using Perfume Classic.
Filter:
EyeCandy 4000 – Glass (text)
-------------------------------------------------------------------------------
Open your template. Delete the following layers: 8, 7, & Raster 1. Merge together layers 3 & 4.
Set your canvas size to 800 x 700. Now resize by 75%.
Replace each layer with the following (resize each paper by 86% beforehand):
1 – paper 9
2 – paper 8
3 – paper 11
5 – paper 1
6 – paper 10
Open your mask & paper 3. Resize your paper by 75%. Paste as a new layer above the background layer. Apply your mask, merge group. Duplicate your mask layer.
Open element 10. Resize by 80%. Paste as a new layer above the orange paper layer. Place to the top of your template layers.
Now let’s add our remaining elements:
132 – resize by 40%, rotate left twice. Paste as a new layer above the top layer, then place to the bottom of the green paper layer.
143 – resize by 60%. Place to the top right.
75 – resize by 70%. Place to the top of the green paper layer.
112 – resize by 80%, rotate left. Place over the vine. If you have any of the confetti cut off at the top, just use your eraser tool and erase that.
53 – resize by 40%. Place to the bottom right of the green paper layer.
5 – resize by 50%. Place to the bottom right corner.
68 – resize by 30%, flip horizontal. Place to the right side.
103 – resize by 25%, flip horizontal. Place to the bottom left.
15 – resize by 80%. Place to the bottom.
7 – resize by 60%. Place to the bottom right. Duplicate, then place slightly in from the bottom left.
28 – resize by 50%. Place to the bottom right.
72 – resize by 30%. Place to the left, just below the vine corner.
99 – resize by 15%. Place towards the bottom of the mushrooms. Rotate slightly to the right.
73 – resize by 25%, flip horizontal. Place over the corner of the vine.
59 – resize by 30%. Place towards the top right. Rotate slightly to the right.
86 – resize by 50%. Place to the bottom left.
70 – resize by 25%. Place to the bottom left of the lollipop.
89 – resize by 25%. Place to the right of the poison.
61 – resize by 25%. Place between the poison & the cupcake.
65 – resize by 25%. Place to the right of the pumpkin.
Open your tube, resizing slightly. I resized by 80%. Paste as a new layer above the green paper layer. Flip horizontal. Arrange over the paper layer and then when satisfied with placement, on the paper layer, select all, float, defloat. On the tube layer, selections, invert & press delete. Deselect. Set the blend mode for your tube to soft light.
Paste your tube again, this time above the orange ribbon layer, resizing as necessary. Place over the right side of the green paper layer.
Apply a drop shadow to your layers of choice. Right click over your layers palette, merge, merge visible to new layer. On the merged layer, set the blend mode to overlay, 65.
For your text, set your foreground to #d14100 & your background to #f4d33e. Set your background to a linear gradient, repeats & angle set to 0. Type your name out & apply. Here you can add your glass effect, using the default settings but changing the glass color to white.
I also added a gradient glow, color is #f8fafb.
Merge visible & save as a png.
Thanks for checking out my tutorials.
Saturday, October 12, 2019
I love flowers...and with the fall upon us, I'm seeing less & less of them.
So I decided to make some flowery masks :)
Enjoy!
You can grab them here.
Tuesday, October 8, 2019
This tutorial was written by me on October 8th, 2019 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP 2019
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the art of Kajenna. You can purchase her tubes here.
Kit by ChocUKDesigns called Autumn Whispers.
You can purchase it here.
Mask 10 from Melissaz Creationz. You can find it here.
Font of choice. I am using Peas & Carrots.
Filters: Mura’s Meister Copies
-------------------------------------------------------------------------------
Open Frame 2. Resize by 75%, all layers unchecked. Free rotate a little to the left.
Open your mask & paper 11. Resize your paper by 60%. Paste as a new layer onto your frame canvas, then move to the bottom layer. Apply your mask, then merge group.
On your frame layer, use your magic wand & click inside the frame. Selections, modify, expand by 10. Open paper 4 & resize by 60%. Paste as a new layer onto your frame canvas. Selections, invert & press delete. Deselect & move your paper below the frame layer.
Open element 178 & resize by 40%. Paste as a new layer just above the mask layer. Then Mura’s Meister Copies, encircle preset selected. Change the Shift X & Shift Y to 60 & click ok.
Now let’s add our remaining elements:
131 – resize by 70%, rotate left. Paste as a new layer above the frame layer, then place to the upper right corner of the frame.
48 – resize by 60%. Place over the leaves in the upper right corner. Rotate slightly to the right.
53 – resize by 60%. Place over the bow.
104 – resize by 60%. Place to the left side.
135 – resize by 25%. Place over the right leg of the scarecrow.
95 – Place towards the bottom. Rotate slightly to the left.
80 – resize by 50%. Place to the bottom left corner.
30 – resize by 30%. Place to the right of the pumpkins. Duplicate & place to the bottom right corner, a little up from the other one.
136 – resize by 25%. Place to the bottom, a little in from the right corner. Duplicate, flip vertical. Move below the original, then place up & to the left of the original.
121 – resize by 25%. Paste as a new layer above the duplicate orange leaf, then place to the right of the duplicate. Duplicate, then resize by 80%, all layers unchecked. Now move the duplicate to the top layer. Place to the bottom of the pumpkins.
133 – resize by 60%. Paste as a new layer above the original yellow flower. Place to the bottom.
203 – resize by 30%. Place to the bottom right corner.
201 – resize by 30%. Paste as a new layer above the top yellow/orange leaf layer. Place to the bottom of the pumpkins, a little to the right.
78 – resize by 35%. Place to the right of the candy apple.
118 – resize by 40%. Place to the bottom, to the right of the squirrel.
47 – paste as a new layer.
Open your tube, resizing slightly. Paste as a new layer just below the frame layer. Place the face of your tube over the paper layer for the frame. On the paper layer, select all, float, defloat. On the tube layer, selections, invert & press delete. Deselect & set the blend mode to soft light.
Paste your tube again, this time above the button layer. Resize as necessary & Place over the frame to your liking.
Add your name, copyright, & license info. Apply a drop shadow of choice to your layers, then merge visible. Save as a png.
Thanks for checking out my tutorials.
Thursday, October 3, 2019
This tutorial was written by me on October 3rd, 2019 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP 2019
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the art of VeryMany. You can purchase her tubes here.
Kit is from Bookworm Dezines called Mystic Fall. You can purchase it here.
Mask 205 from Gems Taggin’ Scraps. You can find it here.
Font of choice. I am using Chalisa Oktavia.
Filters:
Mura’s Meister Copies
-------------------------------------------------------------------------------
Open a new blank image, 650 x 650.
Open Element 100. Resize by 45%. Paste as a new layer onto your blank canvas. Duplicate & move slightly to the right. Move the duplicate below the original. On the original, rotate slightly to the left. See my tag for reference.
On the duplicate frame layer use your magic wand & click inside the frame. Selections, modify, expand by 10.
Open Paper10. Resize by 81%. Paste as a new layer. Selections, invert & press delete. Deselect & move below the duplicate frame layer. Repeat for the other frame.
Open your mask & Paper5. Resize your paper by 81%. Paste your paper as a new layer and move to the bottom layer. Apply your mask, merge group. Duplicate your mask, then add noise, gaussian, 25%, monochrome checked.
Open Element83. Resize by 25%, rotate right. Paste as a new layer.
Mura’s Meister Copies – Encircle preset, change the Shift X & Shift Y both to 60. Press OK.
Open Element18. Resize by 60%. Paste as a new layer above the bottom frame layer.
Now let’s add our remaining elements, which will be placed above the frame layers:
Element15 – resize by 30%. Place to the left side.
Element25 – resize by 25%. Place to the left of the previous element.
Element16 – resize by 30%. Place between the two purple flowers.
Element94 – resize by 25%. Place to the bottom right.
Element77 – resize by 70%. Place to the bottom.
Element3 – resize by 18%. Place to the bottom, over the left side of the crates.
Element79 – resize by 18%. Place to the right of the lantern.
Element72 – resize by 25%. Place to the bottom.
Element4 – resize by 25%. Place to the upper right, directly above the crates.
Element50 – resize by 20%. Place to the bottom left.
Element40 – resize by 25%. Place to the bottom right of the books.
Element67 – resize by 20%. Place to the bottom left & to the left of the compass.
Element5 – resize by 15%. Place to the bottom, between the jar & the compass. Duplicate & place to the upper right corner of the right hand frame.
Element28 – resize by 15%. Place to the bottom right, to the right of the lantern.
Element56 – resize by15%, flip horizontal. Place to the bottom of the squirrel.
Element98 – resize by 15%. Place to the bottom & to the right of the compass.
Element52 – resize by 12%, flip horizontal. Place over the purple flowers.
Element20 – resize by 45%. Place to the bottom left. Duplicate, mirror horizontal.
Open your tube. Paste as a new layer above the first frame back layer. Place over the frame back layer to your liking. On the frame back layer, select all, float, defloat. On the tube layer, selections, invert & press delete. Deselect. Set the blend mode to soft light. Repeat for the other frame, but flip your tube horizontally.
Paste your tube again, this time above the purple flower layers, resizing as necessary. Place over the center of the frames. Use your rectangle selection tool to select any part of the tube that hangs below the rest of the tag, then press delete. Deselect.
Duplicate your tube, gaussian blur 3.00. Set the blend mode to screen, 70.
Add your name, copyrights, & license info. Apply a drop shadow of choice to your layers, then merge visible. Save as a png.
Thanks for checking out my tutorials.
Thursday, September 26, 2019
This tutorial was written by me on September 26th, 2019 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP 2019
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the art of VeryMany. You can purchase her tubes here.
PTU kit from Bellisima Designs called It’s My Birthday. You can purchase it here.
Font of choice. I am using Navy Ballad.
-------------------------------------------------------------------------------
Open a new blank image, 600 x 250 px.
Open paper 8. Resize by 17%. Paste as a new layer onto your blank canvas.
Let’s add our elements:
5 – resize by 71%. Paste as a new layer. Objects, Align, Top.
10 – resize by 8%. Place to the upper right corner. Duplicate, mirror, horizontal.
11 – resize by 25%, rotate right. Place to the top of the canvas.
19 – resize by 8%. Place to the bottom right corner. Duplicate, mirror horizontal.
14 – resize by 12%. Place to the right, about ¾ of the way over. Duplicate, mirror horizontal.
28 – resize by 6%. Place to the bottom left corner.
12 – resize by 6%. Place to the right of the lace element we just added.
48 – resize by 8%. Place to the bottom right corner.
4 – resize by 20%, rotate left. Place to the bottom. Duplicate & set the blend mode to screen, 70.
49 – resize by 40%. Place to the bottom, over the right side of the flower spray.
16 – resize by 5%. Place over the right side of the canvas. Rotate slightly to the right.
Open your tube & resize as necessary. Paste as a new layer above the original pink flower spray layer. Place in the center of your canvas or slightly to the left. Duplicate your tube, gaussian blur 3.00. Set the blend mode to screen, 80.
Add a new layer above the top layer. Floodfill with #fefafb. Select all. Selections, modify, contract by 2. Press delete, deselect.
Add noise, gaussian, 50, monochrome checked.
Add your name, copyrights, & license info. Apply a drop shadow of choice to your layers, then merge all, flatten. Save as a png.
Thanks for checking out my tutorials.
Saturday, September 21, 2019
This tutorial was written by me on September 21st, 2019 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP 2019
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the art of AlessiaC. You can purchase her tubes here.
PTU kit from AngelKKreationz called Trick or Treat. You can purchase it here.
Mask 877 by me. You can find it here.
Template 19 from Sylly Creationz. You can find it here.
Font of choice. I am using MRF Funky Fresh.
Filters:
Filters Unlimited 2.0
-------------------------------------------------------------------------------
Ok let’s get started.
Open your template. Set the canvas size to 900 x 800 px. Resize all layers by 67%.
Delete the text layers & credits layer.
Merge together the following layers:
sml green rectangle left & sml green rectangle right
blue square bottom left & blue square top right
black square bottom & black square top
blue square bottom right & blue square top left
red square bottom & red square top
white rectangle left & white rectangle right
green rectangle left & green rectangle right
Open your mask & paper P8. Resize your paper by 75%. Paste as a new layer just above the background layer of your template. Apply your mask, merge group. Duplicate. Place to the top right corner. On the original, place to the bottom right corner. Merge down.
Replace each template layer with the following:
sml green rectangle left – P11
blue square bottom left – P6
black square bottom – P1
blue square bottom right – P6
red square bottom – select all, float, defloat. Add a new raster layer & floodfill with #1d1d1b.
Filters Unlimited, paper backgrounds, beer mat white. Click ok. Adjust, brightness/contrast, brightness -200, contrast 1.
white rectangle left – P11
red rectangle – repeat the steps you did on the red square layer.
Black rectangle – P4
green rectangle left – P3
white rectangle – P11
blue rectangle – P9; resize to 500 px first, then place to your liking over the original layer before removing the excess of the paper.
Black circle – P3
blue circle – P2
red circle – P10
You can either keep or discard the dotted circle layer. I kept it and just changed the color to white.
Open element 35. Resize by 70%. Paste as a new layer above the spider paper layer. Place to the top of the spider paper & center over it. On the paper layer, select all, float, defloat. On your drip layer, selections, invert & press delete. Deselect.
Open element 2. Resize by 60%. Paste as a new layer above the graveyard black & white paper layer. Place to the top right. Duplicate, mirror horizontal.
Now let’s add our remaining elements:
88 – resize by 80% Paste as a new layer above the dotted circle layer. Rotate slightly to the left, then place towards the top of your template layers.
76 – resize by 40%. Place to the top right.
47 – resize by 30%. Place over the right side of the orange circle layer. Rotate slightly to the left.
36 – resize by 90%. Paste as a new layer.
6 – resize by 25%. Place to the bottom right of your circle layers.
70 – resize by 30%. Place over the left side of your circle layers, move slightly down.
44 – resize by 30%. Place to the bottom, slightly to the left. Rotate slightly to the left.
12 – resize by 30%. Place to the bottom.
29 – resize by 60%. Place to the bottom right.
83 – resize by 30%. Place to the bottom right of the white ghost.
64 – resize by 30%. Place to the bottom left of the white ghost.
39 – resize by 50%. Place to the far left.
32 – resize by 20%. Place to the bottom left of the leggy monster.
16 – resize by 25%. Place to the bottom of the leggy monster. Rotate a little to the left.
11 – resize by 30%. Place to the right of the poison bottle.
51 – resize by 25%. Place to the bottom left. Rotate slightly to the left.
69 – resize by 30%. Place to the bottom of the yellow ghost.
13 – resize by 20%. Place to the bottom, between the flower & candles.
Open your tube, resizing as necessary. Paste as a new layer above the sparkle layer.
Add your name, copyrights, & license info. Apply a drop shadow of choice to your layers, then merge visible. Save as a png.
Thanks for checking out my tutorials.
Subscribe to:
Posts
(Atom)